Dies ist eine alte Version des Dokuments!
##### PREQUEST
Download unzip and put on sd card the ARM software (Raspbian Stretch Lite)
Win32DiskImager
PuTTY
login as: pi
password: raspberry
##### SETUP
passwd
sudo apt-get update
sudo apt-get upgrade
sudo raspi-config (Network Options/N1/N2, Localisation Options I2)
sudo reboot
##### INSTALL RTL-SDR Library
sudo apt-get install -y git cmake pkg-config libusb-1.0-0-dev
git clone git://git.osmocom.org/rtl-sdr.git
cd rtl-sdr
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
make
sudo make install
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
sudo ldconfig
rm -rf *
##### Blacklist the DVB-T Drivers
sudo nano /etc/modprobe.d/blacklist-rtl.conf
# This creates a new file so enter the following lines:
blacklist dvb_usb_rtl28xxu
blacklist rtl2832
blacklist rtl2830
# Press control-X followed by Y to exit and save the modified file.
sudo reboot
rtl_test -t
rtl_tcp -a 192.168.1.36
##### INSTALL AriSpy HF+ Library
# sudo apt-get install -y cmake libusb-1.0.0-dev
wget https://github.com/airspy/airspyhf/archive/master.zip
unzip master.zip
cd airspyhf-master
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
make
sudo make install
sudo ldconfig
rm -rf *
# cd /home/pi
# rm master.zip
mkdir ~/spyserver
wget https://airspy.com/downloads/spyserver-arm32.tgz
tar -xvf spyserver-arm32.tgz -C ~/spyserver
cd ~/spyserver
sudo chmod +x spyserver
##### Configure SpyServer
sudo nano spyserver.config
sudo reboot
cd ~/spyserver
./spyserver spyserver.config