Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen der Seite angezeigt.

--- spyserver [2019/01/16 10:41] – dani
+++ spyserver [2019/01/26 00:51] (aktuell) – dani
@@ Zeile 1: / Zeile 1: @@
-##### PREQUEST
+##### PREREQUEST\\
+Download unzip and put on sd card the ARM software (Raspbian Stretch Lite)\\
-Download unzip and put on sd card the ARM software (Raspbian Stretch Lite)
+Win32DiskImager\\
+Write File SSH into root\\
-Win32DiskImager
 PuTTY
-login as: pi
+login as: pi\\
+password: raspberry\\
-password: raspberry
+##### SETUP\\
+passwd\\
+sudo apt-get update\\
+sudo apt-get upgrade\\
+sudo raspi-config (Network Options/N1/N2, Localisation Options I2)\\
+sudo reboot\\
-##### SETUP
+##### INSTALL RTL-SDR Library\\
+sudo apt-get install -y  git cmake pkg-config libusb-1.0-0-dev\\
+<nowiki>
+git clone git://git.osmocom.org/rtl-sdr.git
+</nowiki>\\
+cd rtl-sdr\\
+mkdir build\\
+cd build\\
+cmake ../ -DINSTALL_UDEV_RULES=ON\\
+make\\
+sudo make install\\
+sudo cp ../rtl-sdr.rules /etc/udev/rules.d/\\
+sudo ldconfig\\
+rm -rf *\\
-passwd
+##### Blacklist the DVB-T Drivers\\
+sudo nano /etc/modprobe.d/blacklist-rtl.conf\\
+# This creates a new file so enter the following lines:\\
+blacklist dvb_usb_rtl28xxu\\
+blacklist rtl2832\\
+blacklist rtl2830\\
+# Press control-X followed by Y to exit and save the modified file.\\
+sudo reboot\\
-sudo apt-get update
+rtl_test -t\\
+rtl_tcp -a 192.168.1.36\\
-sudo apt-get upgrade
+##### INSTALL AriSpy HF+ Library\\
+# sudo apt-get install -y  cmake libusb-1.0.0-dev\\
-sudo raspi-config (Network Options/N1/N2, Localisation Options I2)
+<nowiki>
+wget https://github.com/airspy/airspyhf/archive/master.zip\\
-sudo reboot
+</nowiki>
+unzip master.zip\\
-##### INSTALL RTL-SDR Library
+cd airspyhf-master\\
+mkdir build\\
-sudo apt-get install -y  git cmake pkg-config libusb-1.0-0-dev
+cd build\\
+cmake ../ -DINSTALL_UDEV_RULES=ON\\
+make\\
+sudo make install\\
+sudo ldconfig\\
+rm -rf *\\
+# cd /home/pi\\
+# rm master.zip\\
+##### INSTALL SPYSERVER\\
+mkdir ~/spyserver\\
 <nowiki>
-git clone git://git.osmocom.org/rtl-sdr.git
+wget https://airspy.com/downloads/spyserver-arm32.tgz\\
 </nowiki>
+tar -xvf spyserver-arm32.tgz -C ~/spyserver\\
+cd ~/spyserver\\
+sudo chmod +x spyserver\\
-cd rtl-sdr
+##### Configure SpyServer\\
+sudo nano spyserver.config\\
+sudo reboot\\
-mkdir build
+cd ~/spyserver\\
+./spyserver spyserver.config\\
-cd build
+##### SERVICE\\
+sudo nano /etc/systemd/system/spyserver.service\\
+###\\
+[Unit]\\
+Description=AirSpy HF+ SpyServer Service\\
+Wants=network-online.target\\
+After=multi-user.target\\
-cmake ../ -DINSTALL_UDEV_RULES=ON
+[Service]\\
+Type=idle\\
+ExecStart=/home/pi/spyserver/spyserver /home/pi/spyserver/spyserver.config\\
+StandardOutput=inherit\\
+StandardError=inherit\\
+Restart=always\\
-make
+[Install]\\
+WantedBy=multi-user.target\\
+###\\
+sudo chmod 777 /etc/systemd/system/spyserver.service\\
+sudo systemctl daemon-reload\\
+sudo systemctl enable spyserver.service\\
+#sudo systemctl disable spyserver.service\\
-sudo make install
+##### SERVICE\\
+sudo nano /etc/systemd/system/rtlsdr.service\\
+###\\
+[Unit]\\
+Description=RTL-SDR Server\\
+Wants=network-online.target\\
+After=multi-user.target\\
-sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
+[Service]\\
+Type=idle\\
+ExecStart=/bin/sh -c "/usr/local/bin/rtl_tcp -a 192.168.1.36"\\
+WorkingDirectory=/home/pi\\
+StandardOutput=inherits\\
+StandardPutput=inherits\\
+Restart=always\\
-sudo ldconfig
+[Install]\\
+WantedBy=multi-user.target\\
-rm -rf *
+###\\
+sudo chmod 777 /etc/systemd/system/rtlsdr.service\\
-##### Blacklist the DVB-T Drivers
+sudo systemctl daemon-reload\\
+sudo systemctl enable rtlsdr.service\\
-sudo nano /etc/modprobe.d/blacklist-rtl.conf
+#sudo systemctl disable rtlsdr.service\\
-# This creates a new file so enter the following lines:
-blacklist dvb_usb_rtl28xxu
-blacklist rtl2832
-blacklist rtl2830
-# Press control-X followed by Y to exit and save the modified file.
 sudo reboot
-rtl_test -t
+sudo service spyserver stop\\
+sudo service spyserver start\\
-rtl_tcp -a 192.168.1.36
+sudo service spyserver restart\\
-##### INSTALL AriSpy HF+ Library
-# sudo apt-get install -y  cmake libusb-1.0.0-dev
-wget https://github.com/airspy/airspyhf/archive/master.zip
-unzip master.zip
-cd airspyhf-master
-mkdir build
-cd build
-cmake ../ -DINSTALL_UDEV_RULES=ON
-make
-sudo make install
-sudo ldconfig
-rm -rf *
-# cd /home/pi
-# rm master.zip
-mkdir ~/spyserver
-wget https://airspy.com/downloads/spyserver-arm32.tgz
-tar -xvf spyserver-arm32.tgz -C ~/spyserver
-cd ~/spyserver
-sudo chmod +x spyserver
-##### Configure SpyServer
-sudo nano spyserver.config
-sudo reboot
-cd ~/spyserver
+vcgencmd measure_temp && date\\
+htop\\
-./spyserver spyserver.config
+###### Timekeeping\\
+sudo nano /etc/systemd/timesycd.conf\\
+###\\
+NTP=0.ch.pool.ntp.org 1.ch.pool.ntp.org 2.ch.pool.ntp.org 3.ch.pool.ntp.org\\
+###\\
+sudo reboot\\
+timedatectl status\\
+cat /var/log/syslog | grep systemd-timesyncd
+##### Prevent dropping WiFi\\
+sudo iw wlan0 get power_save\\
+sudo iw wlan0 set power_save off\\
+sudo nano /etc/rd.local\\
+###\\
+/sbin/iw/dev wlan0 set power_save off\\
+###\\
+##### Midnight commander\\
+sudo apt-get install mc -Y\\